TBP Windows and Doors · Dallas, TX
Slider Solutions
Large-format sliding door systems that stack or pocket away — engineered for the opening, aligned to move with one hand.
A Slider Solution is not a patio door — it is a moving wall. Multi-panel systems that stack away or pocket into the structure turn a Dallas living room into a covered terrace and back again, and they are the signature move of modern Texas architecture. TBP Windows and Doors specifies and installs sliding systems sized to the real opening, with the structure, rollers and drainage engineered before the glass is ordered.
The difference between a slider that thrills and one that fights you is specification and alignment: header loads carried properly, tracks dead level, panels adjusted so a wall of glass moves with one hand. That is the standard TBP installs to — and our gallery photos show the results in Dallas-area homes.
What You Get with Our Slider Solutions
Multi-slide configurations
Panels that stack, pocket or meet at corners — the opening becomes the room's best feature.
Engineered for span
Systems specified for the actual width and wind load of your opening, not optimistic catalog numbers.
One-finger operation
Precision rollers and aligned tracks make a huge panel move like a drawer. That is the test — try it.
Low & flush sill options
Threshold choices from full weather sills to near-flush transitions for seamless indoor-outdoor floors.
Glass packages per exposure
Low-E, laminated and impact options chosen by elevation — west glass in Texas earns different glass.
Published 10-year warranty
Glass defects covered 10 years; finishes and hardware on published terms. Custom without the risk.
Options & Materials
Configuration comes first: panels stacking left, right or split; pocketing where wall depth allows; and corner-meeting systems that open a room's whole corner. Then sills (weather versus low-profile), screens (sliding or retractable), and glass — clear, low-E by elevation, laminated for security and storm exposure. Bring plans or rough measurements to the conversation; slider systems are structural decisions and deserve engineering before aesthetics. We will sketch the realistic options for your opening and price each one.
How the Job Works, Step by Step
- 1
Free consultation & measuring
It starts with a free consultation. We look at your existing openings, talk through what you want to change, take exact measurements and note anything unusual — out-of-square frames, deep sills, HOA rules — that affects the plan.
- 2
Written quote, no pressure
You receive a written quote that spells out the product, the scope and the total price. No vague allowances, no pressure to sign on the spot. Take the time you need to compare.
- 3
Order & scheduling
Once you approve, your products are ordered or made to the exact measurements from step one. We confirm an installation date that fits your schedule and tell you how long the work will take.
- 4
Installation day
Our installers protect floors and furniture, remove the old units, fit the new ones, seal and trim the openings, and test every unit before they leave. Most homes are finished the same day.
- 5
Walkthrough & cleanup
We walk the finished work with you, show you how everything operates, register any warranty paperwork and take all packaging and old materials away. The room is left clean and ready to use.
Care & Maintenance
Sliding systems stay smooth with housekeeping: vacuum tracks monthly, keep sill drainage slots clear, and wipe seals with a damp cloth. Rollers and multi-point locks appreciate a light manufacturer-approved lubricant yearly. If a panel starts to drag, call before forcing it — a roller adjustment is cheap; a damaged track is not. All of it sits under TBP's published warranty terms.
What Affects the Price?
No two homes in Dallas are the same, so honest pricing starts with a look at your actual project. These are the factors that move the number most:
- Span and height of the opening
- Number of panels and configuration — stacking, pocketing, corner-meeting
- Glass package — impact, low-E, laminated
- Structural header and opening preparation
- Finish, hardware and screen options
For general planning numbers, see our Price Guide — those are market ranges, not our prices. Your exact, written price comes free with your quote: call (214) 214-3667.
Slider Solutions Photos
Photos from our own completed work. Click any photo for the full view.
Slider Solutions — Frequently Asked Questions
How wide can a slider system be?+
Very large. Multi-panel systems span openings measured in tens of feet when the structure allows. Send your plans or measurements and we will specify the maximum realistic system for the opening.
What is the difference between stacking and pocketing?+
Stacking panels park at one or both ends; pocketing panels disappear into wall cavities. Pocketing needs wall depth planned in advance — easiest in new construction or major remodels.
Are big sliders secure?+
Quality sliding systems are engineered with multi-point locks, interlocking meeting rails and laminated-glass options. We will show you the hardware and glass choices that fit your comfort level.
What warranty covers a slider system?+
Glass defects are covered for 10 years under TBP's published warranty, along with 10-year terms on finishes, structural steel and hardware. The full warranty page on this site has the summary.
How much do slider solutions cost?+
The honest answer is that it depends on size, material and the condition of the existing opening. Beware of anyone who quotes a firm price without measuring. TBP Windows and Doors measures first and then gives you a written quote with the full price — free — so you can compare it properly.
How long does a typical slider solutions project take?+
Measuring and ordering take the first part of the timeline; the on-site work for most homes is completed in a day. Larger or custom projects take longer, and we give you the schedule in writing before you commit, so you can plan around it.
Do you offer free estimates?+
Yes — call (214) 214-3667 and we will arrange a free consultation and written quote. There is no obligation and no pressure to decide on the spot.
Do you serve my part of Dallas?+
TBP Windows and Doors serves the areas listed on our Service Areas page. If your neighborhood is close to a listed area but not named, call us — we will tell you straight away whether we can reach you.
What should I prepare before installation day?+
Clear the area around each opening, take down curtains or blinds if we are not replacing them, and move fragile items away from the work zone. Our team protects floors and furniture, and removes the old units and packaging when the job is done.
Can slider solutions be customized for unusual sizes or shapes?+
In most cases, yes. Arches, angled tops, oversized openings and out-of-square frames are measured individually and made or ordered to fit. Bring us the awkward opening — it is usually the one that benefits most from a custom solution.
What information helps my quote be accurate?+
Rough measurements (width × height in inches), a photo of each opening, and a note about what you want to change. Send those when you call (214) 214-3667 and your written quote will be faster and closer to the final number.
What happens if something is not right after the job?+
Call us. TBP Windows and Doors stands behind its work: if something we supplied or installed is not right, we come back and make it right. That is how a local business keeps its name — one fixed problem at a time.
Questions about slider solutions? Talk to a real person.
Call (214) 214-3667 or send the 2-step quote form — it takes under a minute.